Logo
  • Home
  • Z100 -RF module

Image

Click on above image to view full picture

Z100 -RF module

In stock
Z100 is a surface-mounted module, developer can establish IEEE 802.15.4 system using this module for short time to market and the cost effective. This module helps developer minimize development effort and skip the complicated RF design stage. Two module types are available: Z100TC chip-antenna and Z100TI IPEX connector. Both support pre-program communication range through network protocol stack. *Modules come unloaded or flashed with firmware of ZigBee Coordinator or Router Z100 meets the standards of EN 300 440, US FCC CFR47 Part 15 and Japan ARIB STD-T66 standard.
Be the first to review this product

Z100 is a surface-mounted module, developer can establish IEEE 802.15.4 system using this module for short time to market and the cost effective. This module helps developer minimize development effort and skip the complicated RF design stage. Two module types are available: Z100TC chip-antenna and Z100TI IPEX connector. Both support pre-program communication range through network protocol stack. *Modules come unloaded or flashed with firmware of ZigBee Coordinator or Router Z100 meets the standards of EN 300 440, US FCC CFR47 Part 15 and Japan ARIB STD-T66 standard.

High performance and low power consumption 8051 MCU 2.4 GHz IEEE 802.15.4 standard transceiver
Excellent receiver sensitivity
Wide Power Voltage Range( 2.0V - 3.6V DC)
Digital RSSI/ LQI support and strong DMA function
Equipped with battery detection and temperature sensor
Two programmable USART available, supports several serial protocol.
Equipped with 1 MAC timer compatible with IEEE 802.15.4 , 1 general 16-digit timer and two 8-digit timers.

Z100TC V5.3- Equipped with Chip-antenna
Z100TI V5.3- Equipped with IPEX connector